Description
The ‘PPprint Printing-Kit for Raise3D Pro2’ was specifically tailored to the Raise3D Pro2 Series and includes everything you need for successful and reliable extrusion-based 3D printing with the polypropylene filament ‘P-filament 721’. The included printing surface ‘P-surface 141’ guarantees optimized adhesion of the PP component during 3D printing and allows easy and non-destructive removal of the components after completion. The double-sided adhesive film ‘P-adhesive 220’ is used to fix the ‘P-surface 141’ in the 3D printer. The hand roller ‘P-roller 621’ makes it easier to apply the print run. In addition, ‘P-wipe 515’ and ‘P-cleaner 308’ can be used to advantage for cleaning and maintaining the ‘P-surface 141’ and thus have a positive effect on the service life of the ‘P-surface 141’.
For more information about the individual components of the ‘PPprint Printing-Kit for Raise3D Pro2’, please refer to the descriptions of the individual products.
Products of the ‘PPprint Printing-Kit for Raise3D Pro2’:
– P-surface 141 (304mm x 304mm)
– P-adhesive 220 (304mm x 304mm)
– P-cutter
Instructions for applying the ‘P-surface 141’
P-filament 721 print profile for Raise3D Pro2 Series
Cleaning and maintenance of the ‘P-surface 141‘: Before first use, wash out the ‘P-wipe 515’ thoroughly with lukewarm water. Shake ‘P-cleaner 308’ thoroughly before use. To clean the ‘P-surface 141’, apply enough of the ‘P-cleaner 308’ to evenly cover the entire surface when spread with a paper towel. After a short exposure time (approx. 1 minute), the ‘P-cleaner 308’ can be completely removed with a paper towel. Finally, the ‘P-surface 141’ should be wiped off with the moistened ‘P-wipe 515’. After use, rinse the ‘P-wipe 515’ in clear water, wring it out carefully and then pull it into shape. Do not dry the ‘P-wipe 515’ in the sun or on radiators.
Security alert:
May cause burns if swallowed and enters the airways. It may cause skin irritation and eye irritation. Keep out of the reach of children. Wear protective gloves/eye protection. IF SWALLOWED: Call a POISON CENTER/doctor/first aid if you feel unwell. IF ON SKIN: Wash with plenty of water/soap. IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists, seek medical advice/attention. Dispose of contents/containers in accordance with local regulations. Contains: Ethanol, alkyl glycosides (C8-C10), N,N-dimethyl-9-decenamide.
To our knowledge, this product poses no particular risk provided it is handled in accordance with good industrial hygiene and safety practice for the cleaning and maintenance of ‘P-surface 141’.
Labeling according to Regulation (EC) No 1272/2008 [CLP] is not applicable.
EAN number: 0049364177089
